Automatic Block Making Machine

Product Description

*The whole machine is designed reasonable, with compact structure and low cost, consumes as 50% total power as normal, takes less land, work stable and reliable.

*It use Mitsubishi PLC industry computer, LED touch screen, modify data on line according to different raw material, so the machine run under best condition. It has remote control port, offers the greatest convenience to supervise and control the machine, diagnose the problem and upgrade the system. It is automatic controlled by a computer from preparing the raw material dosage, mixing to product output. There are interlocks between the actions to guarantee safety operation, the whole process is displayed dynamically.

*If there is a mechanical problem, it will shut down and alarm automatically, then show the position of the problem.

More info>>>

JANOME MB-4 (FEATURES)

• Backlit LCD screen
• Auto thread cutter
• USB memory key compatible
• ATA PC card port and USB port (Host) on RCS;
• USB port on MB-4
• Compatible with Janome software
• Embroidery speed up to 800spm
• Built-in designs: 100
• Fonts: 10
• Monogramming: 2 & 3 letter
• Expanded built-in memory
• Change colors to favorite thread: Janome, Robison
• Anton, Madeira, Mettler
• Drag & Drop editing for easy placement
• Embroidery design resize 80% - 120% by 1%
• Rotate in 1 and 90 degree increments (clockwise / counter clockwise)
• Flip vertically and horizontally
• Standard hoops:
  M1: 5.5" x 7.9" (240mm x 200mm)
  M2: 5" x 4.3" (126mm x 110mm) M3: 50mm x 50mm
• Embroidery area tracing
• MY SET screen controls for contrast, in/cm, designation, and other customization
• Zoom in and out
• Multi-language selection
• Stitch-out time indicator
• Stitch counter
• Upper thread and presser foot sensors
• Manual thread tension control
• Ball bearing precision

Jet Engine Test

Turbojet Engine

A jet engine is a reaction engine that discharges a fast moving jet of fluid to generate thrust in accordance with Newton's laws of motion. This broad definition of jet engines includes turbojets, turbofans, rockets, ramjets, pulse jets & pump-jets. In general, most jet engines are internal combustion engines but non-combusting forms also exist.

In some common parlance, the term 'jet engine' is loosely referred to an internal combustionduct engine, which typically consists of an engine with a rotary (rotating) air compressor powered by a turbine with the leftover power providing thrust via a propelling nozzle. These types of jet engines are primarily used by aircrafts for long distance travel. The early jet aircraft used turbojet engines which were relatively inefficient for subsonic flight. Modern subsonic jet aircraft usually use high bypass turbofan engines which help give high speeds as well as, over long distances, giving better fuel efficiency than many other forms of transport.

BMW 6 series face lift

The V8 powered BMW 650i Coupé does the 0-100 km/h dash in 5.1 seconds while the convertible is a tad slower at 5.5 seconds. Of course, being BMW engines, fuel efficiency is not compromised. 11.9 litres/100 kilometres for the Coupé and 12.9 litres for the Convertible.

All 6 series variants apart from the 650i which comes with 18-inch wheels, are fitted as standard with BMW’s runflat tyres allowing the driver to drive to a tyre shop even after a complete loss of tyre pressure.

The 6-series also comes with Tyre Defect Indicator, which permanently monitors air pressure, and warns the driver if tyre pressure drops below the ideal level by more than 30 per cent. The 6-series comes equipped with BMW’s Stop & Go cruise control system allowing owners to maintain a set distance between the car in front.

Jet Fuel Starter made by Garrett

Model and type JFS 100-13. Turboshaft, ( free turbine), The gas generator incorporates a 1-stage centrifugal compressor, annular combustor,1-stage axial flow turbine. The power turbine incorporates an axial flow turbine wheel assembly, a planetary reduction gear system an over running clutch system.

Compressor Air inlet in front of unit. Single stage radial outflow, Single-entry impeller mounted on main shaft supported in 2 ball bearings. air mass flow 1.6 Ib/sec/72,500 rpm.

Combustor Annular fuel manifold assembly, and five simplex fuel nozzles.

Turbine (Gas generator) Hollow nozzle vanes.1-stage axial flow turbine. Maximum temperature 1850 F (1000)C.

Turbine (power) Axial flow free turbine wheel attached to main gear train pinion and reduction gear.

Exhaust Fixed area single outlet, exhausted downward.

Power take-off Reduction gearbox at rear of unit. Output shaft 3,000 rpm.

Fuel system Allied-signal-integral fuel system. pump, governor, internal relief valve, and flow control. For More info click here